Skip to main content Skip to search Skip to main navigation

Product information "HZW 53.0610 Manual rack drive 6000 N w/o. rack, We04, nickel-plated"

The HZW 53.0610 safely transmits forces of up to 6000 in tension and compression. The smooth-running, self-locking worm gear unit made of hardened steel and bronze in a cast housing is designed for continuous operation at temperatures from –20 °C to +60 °C (static up to 90 °C). The hand force is 180 N at a stroke of 11 mm/n per crank revolution.
The available stroke is 0 mm. With this version (stroke > 1100 mm), the reduced compressive force must be taken into account.

By coupling several units via a 3/4" tube (DIN EN 10255), linear loads can also be moved: The HZW 53.0310 and HZW 53.0610 versions each drive a non-self-locking follower unit (HZW 53.0311 / HZW 53.0611) synchronously via laterally extending shafts. The maximum total load is 6000.

Operation with a motorized drive system is also possible in accordance with the assembly and operating instructions. Lateral forces on the drive system must be ruled out in all operating cases.
As options, a folding handle in a galvanized version and a rack run-out stop are available.

 

(HZW 53, Koppeln mit 3'/4"-Rohr)
Drive Type: crank
Force F (N): 6000
Front drive shaft: Square wrench size 12
Manual crank force FH: 180 N
Output Drive: Diameter 20 mm / Hole 8.2 mm
Output shaft right: Diameter 20 mm / Hole 8.2 mm
Rear drive shaft: without
Stroke per crank revolution Hk: 11 mm/n
Weight: 4.2

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


Works best with

Skip product gallery

Works best with

9a788f14-bff8-4b0f-b530-f7bfc1f2bb21
HZZ 53.0604 Rack HZW 53.06 400 mm stroke

The HZZ 53.0604 is the rack for the HZW 53 manual rack drive and transmits forces of up to . With a stroke of , an overall length of 600 mm, a ra...

15204255-4da3-48a7-b368-d759f739a647
HZW 53.9820 Gaiter 1000/ 1200mm stroke with accessories

The flexible bellows protects the rack against contamination across the entire travel path and prevents contact with the moving rack. (HZW 53, Zubehör...

33375908-f0bd-457e-a494-46d4f4311f34
HZZ 53.0614 vz Gear rack HZW 53.06 1400 mm stroke galvanized

The HZZ 53.0614 vz is the rack for the HZW 53 manual rack drive and transmits forces of up to . With a stroke of 1,400 mm, an overall length of 1...

1deaff14-225d-4fb6-8ae6-831d20c53180
HKU 02.2001 Folding crank KL=200 mm

The HKU 02.2001 is a galvanized folding crank with a folding plastic handle for the HZW and HWA manual drives. Crank length: 200 mm. (HKU 02)

5c0eef11-4f46-459f-b1ef-06c4d8fcaa28
HZZ 53.0698 Rackguard galv.

The rack run-out stop is available as an option for the HZZ 45, HZZ 53, and HZZ 55 rack series and is mounted directly on the rack. It mechanically li...

f2a68bf2-d3db-4c13-b170-7b816d393f49
LUB 73.2030 Rack grease cartridge 400 g

The LUB 73.2030 is the approved rack grease for EZZ 64, LZZ, and HZZ. The rack grease can be used in a temperature range from -5°C to +60°...